 |
 |
 |
 |
Heavy Duty Single Reel Uncoiler |
Heavy Duty Double Reel Uncoiler |
Model CHDR |
Model CHDRD |
| Model No. Single | Model No. Duplex | Max Wgt. lbs. | Max Width | Mandrel Expansion Range | Max. O.D. | Speed RPM |
| CHDR 1000-18 | CHDRD 1000-18 | 10000 |
18" |
18" to
22" |
60" |
18 |
| CHDR 1000-24 | CHDRD 1000-24 | 24" |
||||
| CHDR 1000-30 | CHDRD 1000-30 | 30" |
||||
| CHDR 1000-36 | CHDRD 1000-36 | 36" |
||||
| CHDR 1000-42 | CHDRD 1000-42 | 42" |
||||
| CHDR 1000-48 | CHDRD 1000-48 | 48" |
||||
| CHDR 1000-60 | CHDRD 1000-60 | 60" |
||||
|
||||||
| CHDR 1500-18 | CHDRD 1500-18 | 15000 |
18" |
18" to 22" |
60" |
18 |
| CHDR 1500-24 | CHDRD 1500-24 | 24" |
||||
| CHDR 1500-30 | CHDRD 1500-30 | 30" |
||||
| CHDR 1500-36 | CHDRD 1500-36 | 36" |
||||
| CHDR 1500-42 | CHDRD 1500-42 | 42" |
||||
| CHDR 1500-48 | CHDRD 1500-48 | 48" |
||||
| CHDR 1500-60 | CHDRD 1500-60 | 60" |
||||
|
||||||
| CHDR 2000-24 | CHDRD 2000-24 | 20000 |
24" |
18" to 22" |
60" |
18 |
| CHDR 2000-30 | CHDRD 2000-30 | 30" |
||||
| CHDR 2000-36 | CHDRD 2000-36 | 36" |
||||
| CHDR 2000-42 | CHDRD 2000-42 | 42" |
||||
| CHDR 2000-48 | CHDRD 2000-48 | 48" |
||||
| CHDR 2000-60 | CHDRD 2000-60 | 60" |
||||
| CHDR 2000-72 | CHDRD 2000-72 | 72" |
||||
|
||||||
| CHDR 3000-36 | 40000 |
36" |
18" to 22"
|
60"
|
18
|
|
| CHDR 3000-42 | 42" |
|||||
| CHDR 3000-48 | 48" |
|||||
| CHDR 3000-60 | 60" |
|||||
| CHDR 3000-72 | 72" |
|||||
|
||||||
| CHDR 4000-42 | 30000 |
42" |
18" to 22" |
60" |
18 |
|
| CHDR 4000-48 | 48" |
|||||
| CHDR 4000-60 | 60" |
|||||
| CHDR 4000-72 | 72" |
|||||
|
||||||
| CHDR 5000-48 | 50000 |
48" |
18" to 22" |
60" |
18 |
|
| CHDR 5000-60 | 60" |
|||||
| CHDR 5000-72 | 72" |
|||||
|
||||||
| CHDR 6000-60 | 60000 |
60" |
18" to 22" |
72" |
18 |
|
| CHDR 6000-72 | 72" |
|||||
Standard
Features
 |
Heavy duty welded steel construction |
|
Dovetail wedge type expansion |
|
Timken tapered roller bearings |
|
Variable speed A.C. frequency drive (to 18 R.P.M.) |
|
1 Set coil keepers (3 on single 6 on double) |
|
Forward and reverse motions |
|
Jog function in either direction |
|
Loop arm control (potentiometer) |
Optional
Equipment
|
Ultrasonic loop control (non-contact) |
|
Wand type loop control |
|
Photo-electric loop control |
|
Paddle type loop control |
|
Hydraulic sliding base |
|
Hydraulic mandrel expansion (standard on 15000 lbs. & up) |
|
Air operated hold down roll (with or without powered wheel for threading) |
|
Hydraulic threading drive on Mandrel shaft (non motorized only) |
|
Pneumatic brake with regulator (non motorized only) |
|
Dual stage air brake (hi/low pressure) |
|
Spring applied fail safe brake (non-motorized) |
|
Extra set of coil keepers |
|
Quick release on coil keepers |
|
Powered coil retaining system |
|
Other than standard speed / expansion |
|
Location scale in mandrel pad |
|
Machined mandrel (3 pad) |
|
Full O.D. backplate • 72" O.D. coil provision |
|
Urethane spacers for 24" I.D. coils |