Powered Straightener with Optional  Peeler / Threader System Model CPS	Powered Heavy Duty Straightener, 72″ Wide  with Hold Down Roll and Peeler / Threader Model CPSH/CPSEH

All models are available with 5, 7, or 9 straightening rolls and 2 sets of pinch rolls (entry and exit). The lower straightening rolls and top pinch rolls are power driven through cluster gears. A set entry guide rolls for strip location and accurate line up is provided, exit cascade rolls support the material for onward transmission of the strip.

Model No.	Max. Width	Max. Thickness	Min. Thickness.	Pinch Roll Diameter	Straightener Roll Diameter
CPS-12	12″	0.185″	0.025″	3.25″ or 4″	3.25″
CPS-18	18″	0.160″		3.25″ or 4″	3.25″
CPS-24	24″	0.130″		3.25″ or 4″	3.25″
CPS-30	30″	0.100″		3.25″ or 4″	3.25″
CPS-36	36″	0.080″		3.25″ or 4″	3.25″
CPS-42	42″	0.060″		3.25″ or 4″	3.25″
CPS-48	48″	0.040″		3.25″ or 4″	3.25″
CPSH-12	12″	0.250″	0.030″	5″	4″
CPSH-18	18″	0.215″		5″	4″
CPSH-24	24″	0.190″		5″	4″
CPSH-30	30″	0.165″		5″	4″
CPSH-36	36″	0.140″		5″	4″
CPSH-42	42″	0.115″		5″	4″
CPSH-48	48″	0.090″		5″	4″
CPSH-60	60″	0.070″		5″	4″
CPSEHJ-12	12″	0.312″	0.035″	6″	4.75″
CPSEHJ-18	18″	0.270″		6″	4.75″
CPSEHJ-24	24″	0.250″		6″	4.75″
CPSEHJ-30	30″	0.230″		6″	4.75″
CPSEHJ-36	36″	0.210″		6″	4.75″
CPSEHJ-42	42″	0.185″		6″	4.75″
CPSEHJ-48	48″	0.160″		6″	4.75″
CPSEHJ-60	60″	0.140″		6″	4.75″
CPSEHJ-72	72″	0.125″		6″	4.75″

Standard Features

• 5 roll straightener
• 2 sets pinch rolls (entry and exit)
• Pneumatic lift cylinders on pinch rolls
• 2 sets pinch rolls (entry and exit)
• Pressure regulator with gauge
• Bottom straightener & top pinch rolls power driven
• All rolls are 52100 alloy steel hardened to 60-64 Rockwell and ground
• Cluster gears on pinch rolls
• All gears 1045 alloy steel with hardened teeth
• Variable speed A.C. frequency drive to 80 F.P.M. or more on request
• Controls consist of run/jog, jog forward/reverse, reset push-button, power light, start push-button, run push-button, drive off push-button, E-stop & disconnect switch
• Remote jog pendant with 12″ curly cable
• Dancer arm loop control (potentiometer)
• Entry collar type stock guide rolls
• Dial indicators in straightener handwheels

Optional Equipment

• Ultrasonic loop control (non contact)
• Wand type loop control
• Photo-electric loop control
• Other than standard speed
• 7 or 9 roll straightener
• Self centering guide rolls with single handwheel on 2″ acme rod
• Manual or automatic lubrication
• Hardened back-up rolls to limit deflection on straightener rolls
• Exit guide rolls
• Alligator head for easy cleaning of rolls
• Powered depth adjustment on top straightened rolls
• Satin finish on pinch rolls for increased traction
• Smooth hard chrome finish on straightener rolls

< Back to Cradles Straighteners