 |
 |
 |
 |
Model CERFS-25-12 |
Model CERFS-40-24 |
with A.C. Servo Drive System
|
|
Model shown is CERFS 40-24 7 roll straightener with 2 sets of feed rolls driven by a brushless A C. Servo system. Also shown are the self centering guide rolls and overhead cable set. |
Model
No. |
Stock
Width |
Max.
Thickness |
Max.
Speed Feet/Min. |
Feed
Roll Diameter |
Straightener Roll Diameter |
| CERFS-25-12 |
12" | 0.125" | 80 | 2.5" | 2.5" |
CERFS-25-18 |
18" | 0.080" | |||
CERFS-25-24 |
24" | 0.060" | |||
|
|||||
CERFS-40-12 |
12" | 0.150" | 80 | 4" | 4" |
| CERFS-40-12-HD |
12" | 0.200" | |||
CERFS-40-18 |
18" | 0.135" | |||
CERFS-40-18-HD |
18" | 0.187" | |||
CERFS-40-24 |
24" | 0.120" | |||
CERFS-40-24-HD |
24" | 0.170" | |||
CERFS-40-30 |
30" | 0.100" | |||
CERFS-40-30-HD |
30" | 0.150" | |||
CERFS-40-36 |
36" | 0.085" | |||
CERFS-40-36-HD |
36" | 0.125" | |||
CERFS-40-42 |
42" | 0.070" | |||
CERFS-40-42-HD |
42" | 0.110" | |||
CERFS-40-48 |
48" | 0.060" | |||
CERFS-40-48-HD |
48" | 0.100" | |||
CERFS-40-60 |
60" | 0.050" | |||
CERFS-40-60-HD |
60" | 0.080" | |||
CERFS-40-72 |
72" | 0.040" | |||
CERFS-40-72-HD |
72" | 0.065" | |||
|
|||||
CERFS-60-12 |
12" | 0.325" | 80 | 6" | 5" |
| CERFS-60-18 |
18" | 0.300" | |||
CERFS-60-24 |
24" | 0.275" | |||
CERFS-60-30 |
30" | 0.250" | |||
CERFS-60-36 |
36" | 0.200" | |||
CERFS-60-42 |
42" | 0.187" | |||
CERFS-60-48 |
48" | 0.150" | |||
CERFS-60-60 |
60" | 0.125" | |||
CERFS-60-72 |
72" | 0.100" | |||
|
|||||
Standard
Features
 |
Press mounting bracket with machined face |
|
5 roll straightener (7 on CERFS-25 Models) |
|
2 sets of feed rolls (4 rolls total) |
|
All rolls are full width and are made from 52100 alloy steel , hardened to 60-64 Rockwell and ground for maximum longevity |
|
Satin finish on rolls for increased traction |
|
Air operated upper feed roll |
|
Air pressure filter, regulator, lubricator with gauge |
|
Feed rolls driven through cluster gear arrangement |
|
Heavy duty cabinet base with adjustable Pass Line Height of +/- 5" ( +/- 4" on CERFS-25 Models) |
|
All gears 1045 alloy steel with hardened teeth |
|
Heavy duty hardened vertical guide rolls with Jergens quick release handles |
|
Entry Cascade rolls |
|
Closed loop servo drive system with brushless AC servo motor |
|
Master control console with ergonomic slant top (on 4" & 6" models) |
|
Isolation transformer (mounted within control console on 4"& 6" models) 3 phase disconnect with hook-up for 220, 380, 460 or 575 volt power supply |
|
Emergency stop push button |
|
Remote jog fwd/rev pendant control on 12' curly cable |
|
Jog to length in set-up mode |
|
Micro adjustment on fly |
|
Pilot control |
|
Batching and job storage |
|
Inch or metric capability |
|
Serial communication port with RS232/RS422 downloading capabilities |
|
Control language available in English, French, German and Spanish |
Optional
Equipment
|
7 roll straightener (standard on CERFS-25) |
|
Smooth hard chrome finish on Straightener rolls |
|
Powered depth adjustment on top Straightener rolls |
|
Pilot control of top Straightener rolls |
|
Inverted head for use with transfer systems |
|
Manual or automatic central lubrication |
|
Powered vertical adjustment on cabinet base |
|
Self centering guide rolls with single handwheel and built in mechanical digital counter |
|
End of coil stock detection |
|
Overhead cable set |
|
Increased I/O for gag tooling |
|
Larger operator terminal (SOT panel) for use with gag programming |