 |
 |
Model CSSU
Model shown is 10,000 lb x 32" wide with traveling coil car, powered un coiler with hold down arm with powered wheel, material loop support for threading, hydraulic de-kinker unit, powered threading guide arm, 7-roll straightener/feeder combination with pilot release on feed and straightener rolls. Very compact, efficient design requiring minimal floor space. Many sizes and capacities available.
 |
|
Model CSS |
Model shown is 30000 lb x 48' wide with coil storage magazine for 2 additional 30000 lb coils. Total length of machine without storage magazine from press to rear of first coil is 12 1/2 feet. |
|
Model No.
|
Weight Capacity lbs. |
Max. Coil Width
|
Material Thickness Available.
|
Max Speed feet/min.
|
| CSS-1000-12 | 10000 | 12" | 0.375" | 80 |
| CSS-1000-18 | 18" | 0.375" | ||
| CSS-1000-24 | 24" | 0.375" | ||
|
||||
| CSS-1500-18 | 15000 | 18" | 0.375" | 80 |
| CSS-1500-24 | 24" | 0.375" | ||
| CSS-1500-30 | 30" | 0.375" | ||
| CSS-1500-36 | 36" | 0.375" | ||
|
|
||||
| CSS-2000-24 | 20000 | 24" | 0.500" | 80 |
| CSS-2000-30 | 30" | 0.500" | ||
| CSS-2000-36 | 36" | 0.500" | ||
| CSS-2000-42 | 42" | 0.500" | ||
| CSS-2000-48 | 48" | 0.500" | ||
|
|
||||
| CSS-3000-30 | 30000 | 30" | 0.625" | 80 |
| CSS-3000-36 | 36" | 0.625" | ||
| CSS-3000-42 | 42" | 0.625" | ||
| CSS-3000-48 | 48" | 0.625" | ||
| CSS-3000-60 | 60" | 0.625" | ||
| CSS-3000-72 | 72" | 0.625" | ||
|
|
||||
| CSS-4000-36 | 40000 | 36" | 0.625" | 80 |
| CSS-4000-42 | 42" | 0.625" | ||
| CSS-4000-48 | 48" | 0.625" | ||
| CSS-4000-60 | 60" | 0.625" | ||
| CSS-4000-72 | 72" | 0.625" | ||
|
|
||||
| CSS-5000-48 | 50000 | 48" | 0.625" | 80 |
| CSS-5000-60 | 60" | 0.625" | ||
| CSS-5000-72 | 72" | 0.625" | ||
|
||||
|
|
||||
| CSS-6000-72 | 60000 | 72" | 0.625" | 80 |
| CSS-6000-76 | 76" | 0.625" | ||
|
||||
 |
|
|
Model CSS-5000-72
|
Standard
Features
 |
Heavy fabricated plate frame with fixed passline height |
|
Press mounting bracket with machined face |
|
Individually controlled adjustable side plates (hydraulic) |
|
Hardened wear rollers on cradle side plates |
|
Heavy duty anti-friction tapered roller bearings |
|
Heavy duty entry guide rolls |
|
72" O D coil capacity |
|
6 roll straightener (three over three) |
|
All rolls 52100 alloy steel, hardened to 60-64 Rockwell and ground |
|
2 sets of feed rolls (entry & exit) with satin finish |
|
Feed rolls driven through cluster gear arrangement |
|
All gears 1045 alloy steel with hardened teeth |
|
Cradle rolls & straightener rolls are synchronized • Pilot punch control |
|
Hydraulic peeler and entry guide to straightener |
|
Feed system equipped with A C brushless Servo Drive and micro processor control system |
|
Standard line speed of 80 feet per minute |
|
Feed length setting infinitely variable from O to 999.99" |
|
Micro feed adjustment on fly • Jog to length in set-up mode • Inch or metric capability |
|
Isolation transformer with hook up to 380, 460 or 575-volt power supply |
|
Emergency Stop push button • Remote jog fwd/rev pendant control on 12' curly cable |
|
Batching & job storage • serial communication port with RS232/RS422 downloading capabilities |
|
Control language available in English, French, German and Spanish |
Optional
Equipment
|
Eight roll straightener (four over four) |
|
Powered depth adjustment on straightener rolls |
|
Pilot control of top straightener rolls |
|
Hydraulically-operated swivel base for camber control |
|
Exit guide rollers • Coil storage ramp |
|
Powered side plate adjustment on coil storage ramp |
|
Other than standard speed • Powered passline height adjustment |
|
Fully automatic lubrication |
More Flexible Operation
| This spacesaver unit takes up 1/3rd the space of a conventional coil feed line and is so user friendly you can have one operator thread a new 30000 lb coil in under 4 minutes. The hydraulically operated cradle side plates offer ease of set-up and coil centering. A closed loop servo system offers precise feed lengths and results in less downtime and more productivity. |