 |
 |
 |
 |
Powered Straightener with Optional Peeler / Threader System |
Powered Heavy Duty Straightener, 72" Wide with Hold Down Roll and Peeler / Threader |
Model CPS |
Model CPSH/CPSEH |
| All models are available with 5, 7, or 9 straightening rolls and 2 sets of pinch rolls (entry and exit). The lower straightening rolls and top pinch rolls are power driven through cluster gears. A set entry guide rolls for strip location and accurate line up is provided, exit cascade rolls support the material for onward transmission of the strip. |
| Model No. | Max. Width | Max. Thickness | Min. Thickness. | Pinch Roll Diameter | Straightener Roll Diameter |
| CPS-12 | 12" |
0.185" |
0.025" |
3.25" or 4" |
3.25" |
| CPS-18 | 18" |
0.160" |
3.25" or 4" |
3.25" |
|
| CPS-24 | 24" |
0.130" |
3.25" or 4" |
3.25" |
|
| CPS-30 | 30" |
0.100" |
3.25" or 4" |
3.25" |
|
| CPS-36 | 36" |
0.080" |
3.25" or 4" |
3.25" |
|
| CPS-42 | 42" |
0.060" |
3.25" or 4" |
3.25" |
|
| CPS-48 | 48" |
0.040" |
3.25" or 4" |
3.25" |
|
|
|||||
| CPSH-12 | 12" |
0.250" |
0.030" |
5" |
4" |
| CPSH-18 | 18" |
0.215" |
5" |
4" |
|
| CPSH-24 | 24" |
0.190" |
5" |
4" |
|
| CPSH-30 | 30" |
0.165" |
5" |
4" |
|
| CPSH-36 | 36" |
0.140" |
5" |
4" |
|
| CPSH-42 | 42" |
0.115" |
5" |
4" |
|
| CPSH-48 | 48" |
0.090" |
5" |
4" |
|
| CPSH-60 | 60" |
0.070" |
5" |
4" |
|
|
|||||
| CPSEHJ-12 | 12" |
0.312" |
0.035" |
6" |
4.75" |
| CPSEHJ-18 | 18" |
0.270" |
6" |
4.75" |
|
| CPSEHJ-24 | 24" |
0.250" |
6" |
4.75" |
|
| CPSEHJ-30 | 30" |
0.230" |
6" |
4.75" |
|
| CPSEHJ-36 | 36" |
0.210" |
6" |
4.75" |
|
| CPSEHJ-42 | 42" |
0.185" |
6" |
4.75" |
|
| CPSEHJ-48 | 48" |
0.160" |
6" |
4.75" |
|
| CPSEHJ-60 | 60" |
0.140" |
6" |
4.75" |
|
| CPSEHJ-72 | 72" |
0.125" |
6" |
4.75" |
|
Standard
Features
 |
5 roll straightener |
|
2 sets pinch rolls (entry and exit) |
|
Pneumatic lift cylinders on pinch rolls |
|
2 sets pinch rolls (entry and exit) |
|
Pressure regulator with gauge |
|
Bottom straightener & top pinch rolls power driven |
|
All rolls are 52100 alloy steel hardened to 60-64 Rockwell and ground |
|
Cluster gears on pinch rolls |
|
All gears 1045 alloy steel with hardened teeth |
|
Variable speed A.C. frequency drive to 80 F.P.M. or more on request |
|
Controls consist of run/jog, jog forward/reverse, reset push-button, power light, start push-button, run push-button, drive off push-button, E-stop & disconnect switch |
|
Remote jog pendant with 12" curly cable |
|
Dancer arm loop control (potentiometer) |
|
Entry collar type stock guide rolls |
|
Dial indicators in straightener handwheels |
Optional
Equipment
|
Ultrasonic loop control (non contact) |
|
Wand type loop control |
|
Photo-electric loop control |
|
Other than standard speed |
|
7 or 9 roll straightener |
|
Self centering guide rolls with single handwheel on 2" acme rod |
|
Manual or automatic lubrication |
|
Hardened back-up rolls to limit deflection on straightener rolls |
|
Exit guide rolls |
|
Alligator head for easy cleaning of rolls |
|
Powered depth adjustment on top straightened rolls |
|
Satin finish on pinch rolls for increased traction |
|
Smooth hard chrome finish on straightener rolls |