Spacesaver Feedlines

SpaceSaverYR-540

Model CSSU
Model shown is 10,000 lb x 32″ wide with traveling coil car, powered un coiler with hold down arm with powered wheel, material loop support for threading, hydraulic de-kinker unit, powered threading guide arm, 7-roll straightener/feeder combination with pilot release on feed and    straightener rolls. Very compact, efficient design requiring minimal floor space. Many sizes and capacities available.

spacesaver

Model CSS
Model shown is 30000 lb x 48′ wide with coil storage magazine for 2 additional 30000 lb coils. Total length of machine without storage magazine from press to rear of first coil is 12 1/2 feet.

Model No.
Weight Capacity lbs.
Max. Coil Width
Material Thickness Available.
Max Speed feet/min.
CSS-1000-12 10000 12″ 0.375″ 80
CSS-1000-18 18″ 0.375″
CSS-1000-24 24″ 0.375″
Colt
CSS-1500-18 15000 18″ 0.375″ 80
CSS-1500-24 24″ 0.375″
CSS-1500-30 30″ 0.375″
CSS-1500-36 36″ 0.375″
Colt
CSS-2000-24 20000 24″ 0.500″ 80
CSS-2000-30 30″ 0.500″
CSS-2000-36 36″ 0.500″
CSS-2000-42 42″ 0.500″
CSS-2000-48 48″ 0.500″
Colt
CSS-3000-30 30000 30″ 0.625″ 80
CSS-3000-36 36″ 0.625″
CSS-3000-42 42″ 0.625″
CSS-3000-48 48″ 0.625″
CSS-3000-60 60″ 0.625″
CSS-3000-72 72″ 0.625″
Colt
CSS-4000-36 40000 36″ 0.625″ 80
CSS-4000-42 42″ 0.625″
CSS-4000-48 48″ 0.625″
CSS-4000-60 60″ 0.625″
CSS-4000-72 72″ 0.625″
Colt
CSS-5000-48 50000 48″ 0.625″ 80
CSS-5000-60 60″ 0.625″
CSS-5000-72 72″ 0.625″
Colt
Colt
CSS-6000-72 60000 72″ 0.625″ 80
CSS-6000-76 76″ 0.625″
Colt

 

 Dana-HD-SS_lg1

Model CSS-5000-72

Standard Features:

  • Heavy fabricated plate frame with fixed passline height
  • Press mounting bracket with machined face
  • Individually controlled adjustable side plates (hydraulic)
  • Hardened wear rollers on cradle side plates
  • Heavy duty anti-friction tapered roller bearings
  • Heavy duty entry guide rolls
  • 72″ O D coil capacity
  • 6 roll straightener (three over three)
  • All rolls 52100 alloy steel, hardened to 60-64 Rockwell and ground
  • 2 sets of feed rolls (entry & exit) with satin finish
  • Feed rolls driven through cluster gear arrangement
  • All gears 1045 alloy steel with hardened teeth
  • Cradle rolls & straightener rolls are synchronized • Pilot punch control
  • Hydraulic peeler and entry guide to straightener
  • Feed system equipped with A C brushless Servo Drive and micro processor control system
  • Standard line speed of 80 feet per minute
  • Feed length setting infinitely variable from O to 999.99″
  • Micro feed adjustment on fly • Jog to length in set-up mode • Inch or metric capability
  • Isolation transformer with hook up to 380, 460 or 575-volt power supply
  • Emergency Stop push button • Remote jog fwd/rev pendant control on 12′ curly cable
  • Batching & job storage • serial communication port with RS232/RS422 downloading capabilities
  • Control language available in English, French, German and Spanish

Optional Equipment:

  • Eight roll straightener (four over four)
  • Powered depth adjustment on straightener rolls
  • Pilot control of top straightener rolls
  • Hydraulically-operated swivel base for camber control
  • Exit guide rollers • Coil storage ramp
  • Powered side plate adjustment on coil storage ramp
  • Other than standard speed • Powered passline height adjustment
  • Fully automatic lubrication

More Flexible Operation
This spacesaver unit takes up 1/3rd the space of a conventional coil feed line and is so user friendly you can have one operator thread a new 30000 lb coil in under 4 minutes. The hydraulically operated cradle side plates offer ease of set-up and coil centering. A closed loop servo system offers precise feed lengths and results in less downtime and more productivity.

 


< Back to Complete Feedline Solutions

Feed Lines

Request a Quote